BoreSheet — Bore planner

1Bore
2Utilities
3Get PDF

New job

GroundBorePit zoneUtility

Job

Location

County State

Job name Client / owner

Permit # Date

Crew Notes

Bore

Bore length (ft)

Pipe size

Depth at entry pit (ft)

Depth at exit pit (ft)

Final / locator coords (entry pit)

Lat, lon (like 38.123456, -77.123456) Note

Final / locator coords (exit pit)

Lat, lon (like 38.123456, -77.123456) Note

Stand at each pit and tap. Phone GPS is rough (about 10-15 ft off), not a survey. Prints on the plan PDF.

Entry pitch (%) suggested

Exit pitch (%) suggested

Least dirt over the bore (in) to top of reamer

Max depth (ft) blank = no limit

Target depth (ft) blank = auto

Utilities to cross

Target windows (optional)

A depth range the bore must pass through, like a gap between two utilities. The plan aims for it and warns if it can't.

Exit target (ft from entry pit) where it should come up Give or take (ft)

Adjust / After drilling Rods & pipe, ground, rod log, as-built

Rods, pipe & reamer

Rod length (ft)

Reamer size (in)

Adjust pipe details

Rod min. bend radius (ft)

Max pitch change per rod (%)

Pipe material DR / SDR

Pipe OD (in)

Pipe bend factor (× OD)

Pipe min. radius (ft) override

Ground

Get ground from the map

1Pin entry pit

2Pin exit pit

3Get ground from map

Stand at the entry pit, then tap the button.

Pins also go on the map file and the PDF.

Or type ground by hand: feet from the entry pit and the ground height. No shots = flat ground.

Rod log

Add soil / rock and notes per rod. Import your locator log to show the as-built path.

Import from locator

Rod 1 of ?

Soil / rock Note

Rod	Feet from entry pit	Depth (ft)	Pitch %

Edit a reading to field-adjust it. The original file is kept untouched and every change is logged; adjusted rods are marked † on the PDF.

Rod	Ft from pit	Dist	Depth	Pitch	Soil	Note

Depth = ground to the middle of the bore at the end of each rod. Pitch: minus = going down, plus = coming up.

As-Built PRO

Pro is the as-built packet: as-built PDF, map exports (KML, shapefile, GeoJSON, close-out ZIP), planned vs actual with re-plan, and edge of pavement offsets. Logging rods and locator import stay free.

Edge of pavement offsetsLog how far the bore is from the edge of pavement from your bore log. Goes on the as-built PDF as a table and plan view.

Completion dateDepth give or take (in)

Edge of pavement

Which side of the bore is the pavement edge? Look from entry to exit.

Remind me to measure it

Rod 1

Rod #Dist from entry (ft)

Depth ftDepth in

Pitch % (optional) Drift off line (ft, optional)How far the head is left/right of the planned line.

Distance to pavement edge (ft, optional)Tape from the bore path to the edge of pavement, for the inspector's redlines.

Note

Rod	Dist	Plan	Actual	Δ in	Pitch	EOP ft

Close-out files

One ZIP for the owner: As-Built PDF, CSV, map files (KML, GeoJSON, Shapefile). Map spots come from your pit GPS pins, so they are approximate.

State report

Company Add your logo & contact for the PDF

Website, work email, or business name

We'll fill in your logo, phone, email and address.

Company name Address

Phone Email

Contact person

Logo

Drop or paste a logo, or
Choose file

Saved on this phone for every job. Never uploaded.

Inspector page

Add an inspector record page to the PDF Drilling fluid notes Failed / abandoned attempts

BoreSheet — planning aid only, not a stamped engineering design. Field locate and verify all utilities (call 811) before drilling.
How to use it

Rod 1 of ?

Check nearby pipelines/wells

Edge of pavement

Rod 1

Close-out files

State report

This job

The bore

Add your company logo to the sheet? (optional)

Jobs

BoreSheet Pro - The As-Built Packet

Share & export

Import locator log

Crop logo

What should be better?